-
Get drift problems on lizard95 based on MPU6000.
All is working like if accelerometer was not taken in account and after 5 min of flight acc drift become very important. if i land and arm, level is…
-
Can't seem to get it to finish creating the necessary nodes.
Running Lineage 18.1 as of yesterday. Samsung A5 (2017)
[*] ConfigFS seems to be mounted...
[*] ...and usb_gadget is available
[!] us…
-
### Describe the bug
The AOCODARCF722MINIV2 I use does not have OSD function in the 4.5.0 firmware downloaded online from the ground station, but the 4.4.3 firmware downloaded online from the ground …
-
Hello community,
I'm currently working with the crazyflie 2.1 and I flashed the controller_tinympc on my crazyflie. I have a GAP8 deck connected on my crazyflie. At first I have flashed the latest …
-
### Describe the bug
SD Card does not detect. Impossible to write any Log data on SD card. It randomly worked on older Betaflight 4.3.3 but just randomly.
### To Reproduce
Try to read SD Card…
-
Hello!
this project is fantastic and I am very interested in it! I tried using RP2040 and ESP32 to test your code, but couldn't recognize MPU6050
I tested MPU6050 using other code and the hardware i…
-
I have a MPU-6050 and was trying to make it work with FastIMU, unfortunately i get an error code of -1, that lead me to thinking that my sensor was broken, but when I try to read raw data from it I ge…
-
Well, as what I said in #177 , while I highly doubt why MPU+QMC5883L is considered worse than MPU6500, I'm not sure how the ratings of the IMUs are set. May there be detailed comparation between all t…
-
### Describe the bug
If rx protocol SPEKTRUM is selected in Firmware Flasher for 4.5.0 RC3 I get the following compile error
`In file included from ./src/main/pg/rx.c:29:
./src/main/pg/rx.c: In f…
-
Hi friends
i have install baro BMP280 with connection 3.3v GND SCL(I22) SDA (I21) but not work.
I have connected the 3.3V and GND directly to 3.3V and GND of MPU6500.
![IMG20230906225906](https:…