-
I have the following problem - no settings made via menu or web-interface are saved. I define sensors, set what and where to use, after that everything works and shows, but when I turn off the control…
-
`OMJulia.API.getClassNames(omc;class_="Modelica")` works fine.
`OMJulia.API.getClassNames(omc;class_="Modelica", recursive=true)`
gives:
`ERROR: OMJulia.Parser.LexerError("Error while lexing")`
…
-
Hi,
I've built my own EDtracker out of Arduino Pro Micro clone and this MPU 9250 board:
https://www.hotmcu.com/gy91-10dof-mpu9250-and-bmp280-multisensor-module-p-341.html?cPath=7_37
(It's the versi…
-
Hi,
Thanks for open-sourcing this work. When I was trying to train the teacher network of LiDAR and fusion I wasn't able to start it with multiple GPU. Single-GPU training works. Multi-GPU training…
-
```
What steps will reproduce the problem?
1. Add 3 nodes via openzwave-control-panel(besides controller)
2. Adding 4th doesn't work, it gets combined with another node and both are
switched simultan…
-
```
What steps will reproduce the problem?
1. Add 3 nodes via openzwave-control-panel(besides controller)
2. Adding 4th doesn't work, it gets combined with another node and both are
switched simultan…
-
**Describe the problem you have/What new integration you would like**
**Please describe your use case for this integration and alternatives you've tried:**
This Project might be very inter…
-
In http://vladimiralexiev.github.io/Multisensor/#sec-4 I got this:
``` turtle
a nif:Word;
itsrdf:taClassRef nerd:Organization;
itsrdf:taConfidence 0.9; # means the same as "0.9"^^xsd:decimal
i…
-
```
What steps will reproduce the problem?
1. Add 3 nodes via openzwave-control-panel(besides controller)
2. Adding 4th doesn't work, it gets combined with another node and both are
switched simultan…
-
```
What steps will reproduce the problem?
1. Add 3 nodes via openzwave-control-panel(besides controller)
2. Adding 4th doesn't work, it gets combined with another node and both are
switched simultan…