-
### The problem
Hi
I am not able to have clock working on lovelace.
In the log the time sensor seems to be not starting. Bug somewhere or my mistakes?
When I follow the youtube instruction about…
-
### The problem
After moving from "ISY994i" to "ISY994i on Polisy" I noticed an issue:
The HA ISY integration can be installed, configured, and works fine. When Home Assistant is restarted, the inte…
-
### The problem
When using TCP(Ethernet) GW from HACore no device and no entties are populated to HA, though communication seems be exchanging messages and logs info about entities being found.
Usin…
-
### The problem
My TCP Gateway keeps spamming an I_VERSION request/response in my logs. I had a serial gateway earlier and this was not an issue. I just recently upgraded to the latest home assistant…
-
I recently used your MCP23008 library.
The interrupts management is missing, so I tried to implement it myself by subclassing Adafruit_MCP23008 to add an enableInterrupts method.
But the write8 meth…
-
### The problem
I added a discovered device, which in this case is an HDHomeRun. When I try to browse DLNA Servers in the media section, I just see the following text in red: `Server failure: UpnpAct…
-
Hello,
Currently, I am using Hardware Controller System for Hydroponics running on RPI. I want to add support for many wireless sensors(up to 50) and I want to use MySensors + its gateway but I don't…
-
### The problem
When running 2021.12.9 (and possibly older)
The doorbird shows and API error. And does not connect, nor show and video or still images .
rolling back to 2021.12.6 with no other ch…
-
Witam
Gdy kontaktron za pomocą tego sketcha zostaje podłączony do Home Assistant to jest on wykrywany tak jak oświetlenie z encjami switch.xxxxxxx Dobrze jakby lepiej może był wykrywany jako BINARY_S…
-
**The problem**
I recently transitioned my Garage Door hardware over to use MySensors and am using the S_COVER options. Unfortunately, no matter what combination of the V_UP, V_DOWN, V_STOP, V_STATUS…