-
Operating System: Windows 10
PlatformIO Version: Core 6.1.6 - Home 3.4.3
Board: Arduino Nano 33 BLE
I noticed that sketches would work fine when uploaded from Arduino IDE, but doesn't when upload…
-
The chocolatey install (install.ps1) does not work with NanoServer image for Docker, mainly because WebClient is not supported. A workaround would be to use Invoke-WebRequest instead.
See: https://do…
-
### Issue with `pip install apscale-blast`
Hey Till,
When I attempted to run the installation commands for **[apscale-blast 1.0.1](https://pypi.org/project/apscale-blast/1.0.1/)**, I encountered…
-
I have recently acquired a few STM32F103C8T6 (Cortex-M3) & STM32F030F4P6 (Cortex-M0) mini boards, would you mind adding CMSIS / SPL support for those to this platform?
I see the STM32L1, STM32F3, ST…
-
Hi
what follows is an exception trace I can reproduce by running a specific action in the web interface of my firmware.
I am afraid I won't be able to post a minimal sketch to reproduce on your si…
-
I have a Arduino Nano 33 BLE Sense.
For better developing i will using CLion from Jetbrains.
Your scripts are pretty cool😎. This will save me for many hours of CMake configuration.
But the IDE …
-
Hi Alan,
I have used your Detecto framework code frequently on Google Colaboratory and have always successfully trained and used it for detection applications Colab. Recently I tried to train it on …
-
I started Secretive today, and:
* My secrets are gone
* I can't create a new one
It seems like both issues are caused by the same issue: Secretive can't access the Security Server.
```
Secr…
-
### Problem Description
For fused attention, the CK backend is broken and causes the following error
Command to Reprod: `NVTE_FUSED_ATTN=1 NVTE_FUSED_ATTN_CK=1 NVTE_FUSED_ATTN_AOTRITON=0 python ./…
-
How to use .nemo models (for example https://ngc.nvidia.com/catalog/models/nvidia:nemo:stt_ru_quartznet15x5 )?
examples/asr.py --mic 11 --model asr/quartznet-15x5_ru/ru.nemo says "ValueError: resou…