-
I wanted to propose the ACPLK30T PVI be considered to be added to "Optocoupler.lib" but the Transient simulations done in 2023 don't work anymore. DC still works.
NOTE: Data that is attached is fro…
-
### Preliminary information:
In a similar fashion than circuit element manipulation one would expect to access the .param values of a netlist using the dictionary:
From [netlist-manipulation](ht…
-
I executed the following commands to install SKY13nm PDK.
git clone git://opencircuitdesign.com/open_pdks
git clone https://github.com/google/skywater-pdk
cd skywater-pdk
git submodule init lib…
-
Bill of materials is incomplete in Digikey but BOM export appears fully functional and correct when exporting CSV.
Application: KiCad Schematic Editor x86_64 on x86_64
Version: 8.0.2-34-g43d4c8d…
-
cell is ~/cheetah_v3_analog/dependencies/sky130_icrg_ip__ulpcomp/
Run time is exceptionally long for me but about 100x faster for Tim. Suspect an IO setting difference that Tim has set but I have not…
-
While converting a circuit to Netlist, it might be nice to integrate an NGSpice Simulation for operating point. This will be helpful for netlist validation.
-
## Expected Behavior
Line 16 should read
`* include "sky130_fd_pr__esd_nfet_05v0_nvt.pm3"`
## Actual Behavior
Line 16 now is:
`include "sky130_fd_pr__esd_nfet_05v0_nvt.pm3"`
Because of leadi…
holvo updated
7 months ago
-
This might wait for quite a long time, and timeout, many devices, especially when using transient analysis.
```
int elapsedTime = 0, simTimeOut = 3000; // in ms
while (m_simulator->isBGThreadRu…
-
### Environment (OS, Python version, PySpice version, simulator)
Mac Catalina Version 10.15.4
Python3.7.4
PySpice 1.3.2
ngspice31
### Expected Behaviour
Run the example in 8.4.2"Diode Characteri…
-
Any idea to solve the below ngspice build issue as the link is said phising site
```
$ ./autogen.sh --adms
You must have admsXml installed to compile adms models.
See http://mot-adms.sourcefor…