-
Hi, I have such a problem.
Vitocal 242-s heat pump with Vitotronic 200 WO1C
NodeMCU V3
Construction https://github.com/openv/openv/wiki/Bauanleitung-ESP32-Adafruit-Feather-Huzzah32-and-Proto-Wing
…
-
I am using fauxmoESP library version 3.4.0 with NodeMCU
Alexa shows the following issue.
The devices' commands work fine. But this randomly appears in the app.
![image](https://user-images.github…
-
### The problem
Refreshing the device web page served by the web component enabled causes a crash, without the web component the config works as expected.
### Which version of ESPHome has the is…
-
Hello po.. ask lang po bakit po wlang interner ang vendo sa modem wifi po Meron.. ok naman po ang wire functional lahat
-
使用 esptool 刷入固件:
```
esptool.py --chip esp8266 --port /dev/cu.SLAB_USBtoUART --baud 115200 write_flash -fm dio 0x00000 nodemcu-release-20-modules-2021-01-05-12-09-56-float.bin
```
init.lua
…
twn39 updated
3 years ago
-
**IMPORTANT NOTICE
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
Hello guys,
i am using the switch example from kakopappa to connect the nodeMCU witch the internet. The only change I did, is adding MySSID WifiPassword and MyApiKey. But there is no connection. Do y…
-
Hi,
I'm trying to use your library on my NodeMCU project.
It is enough that I add the "#include " on my project to fail the compile with a general error "Error compiling for the card NodeMCU 0.9 (…
-
i got problem when using nodemcu for reading using RFID reader wg26. The problem is serial monitor wont show the id from my tag and always displays a question mark at serial monitor every time I press…
-
Hello! I have a simple script for DHT11 sensor working with Cayenne ioT.
```
#define CAYENNE_DEBUG
#define CAYENNE_PRINT Serial
#include