-
**Describe the bug**
When building and flashing `samples/boards/reel_board/mesh_badge` I get following error after boot: ` i2c_nrfx_twim: Concatenation buffer is too small`
This issue could be rel…
-
When subsequent peer connects, enabling CCC fails even though pairing was successful.
Steps to reproduce:
- clear flash memory
- pair BLE host A -> it connects, pairing successful, after reading …
Qbicz updated
3 years ago
-
I am running the Indoorv1 channel model. I use the following command
./bs_2G4_phy_v1 -s=trial_sim -D=2 -sim_length=5e8 $@ \
-defmodem=BLE_simple -channel=Indoorv1 -argschannel -RiceK=1.5 -speed=2.5 …
-
**Describe the bug**
BLE advertising failed to start on a nRF52840 when enabling BT_LE_ADV_OPT_EXT_ADV.
```
[00:00:00.002,960] ble_m: BLE Stack Ready!
[00:00:00.002,960] ble_peripheral: Blueto…
-
**Describe the bug**
I am building the **onoff_level_lighting_vnd_app** example the the **nrf52dk_nrf52832** board setup. As I am using a custom board that does not implement the nrf52 dcdc I chang…
-
[00:00:00.003,601] littlefs: LittleFS version 2.1, disk version 2.0
[00:00:00.003,814] littlefs: FS at NRF_FLASH_DRV_NAME:0xf8000 is 8 0x1000-byte blocks with 512 cycle
[00:00:00.003,845] littlef…
-
**Describe the bug**
Bluetooth Mesh devices relay their own messages even when the relay feature is disabled/not supported. From what I've seen on one of my projects, device relay's its own message, …
-
Dear
I am using the NRF52832, using the following prj
```
##########
# for GPIO
##########
CONFIG_GPIO=y
##########
# for BLE
##########
CONFIG_BT=y
CONFIG_SENSOR=y
##########
# f…
-
**Describe the bug**
When CONFIG_BT_KEYS_OVERWRITE_OLDEST is enabled, a warning gets thrown by bt_gatt saying no space to store CCC cfg.
**To Reproduce**
Steps to reproduce the behavior:
1. `git…
-
**Describe the bug**
Performing GATT write commands from a peripheral as fast as possible from the main loop while the peer central is performing GATT service discovery and a supervision timeout puts…