-
It's a low priority from the standpoint of required sensors, but I'm wondering if we can support OLED displays in the library... for demos, testing, training, etc. Not sure how to handle which values …
-
When i try to compile the example i get these errors:
/path/to/T8_V1.2_SH1106.ino: In function 'void drawImageDemo()':
T8_V1.2_SH1106:164:77: error: invalid conversion from 'const char*' to 'const…
bntsp updated
6 years ago
-
The idea here would be that for any display that we can drive we would be able to implement a small API where most displays can be treated the same and things like pixel rendering of primitives, Sceni…
lawik updated
4 years ago
-
Hi
I connected DHT31 temp & humidity sensor via i2c (using pin 21 & 22) but it won't work when OLED is initiated (display.init(); ) - I get NaN from DHT31. When I comment out display.init(); sensor w…
kovir updated
5 years ago
-
Fresh install of Raspian on a new Pi4 board
I installed all the dependencies, have the HAT plugged in, the red power led on the board is turned on
I enabled I2C and Serial port hardware in raspi-con…
-
Hello, first of all thank you for your work.
I am having issues tho, I have it all compiled and flashed to my ESP but I am not able to show anything on my screen.
I am only using 1 screen which is C…
-
Board information:
(sysname='GPy', nodename='GPy', release='1.18.2.r7', version='v1.8.6-849-df9f237 on 2019-05-14', machine='GPy with ESP32')
I am actually using the G01 module on a custom board. …
-
I am sorry if this is not the right palce to post this.
When using the adafruit_SSD1306 library with a 2.42 inch display and a Teensy 4.0, the display is filled with random noise. (See attached image…
-
Hi,
I did a few tests before writing this and I'm almost convinced that this issue relates only to this library.
I have a chinese made 128x64 Oled display that I run with software SPI.
In addition I …
-
I was wondering if I could have help getting a version of this library that is compatible with the SH1106 driver which is 132 pixels wide, and causes the display to be cut off on the left side.