-
For example if I want to do a Zone 2 ride at 150 Watts then you need a 3 second average power to be displayed in the UI. This lets you hold a specific power output value more easily (than watching the…
-
Hello there
I would like to get your support regarding issue i found after two weeks of newly purchased Aeotec Home Energy Meter - three clamps GEN5 (60A).
1. Random reset SUM of kWh value to zero…
-
I'm using esphome with my CircuitSetup 6 channel meter to monitor my home power usage. I live in the USA, with split phase 120V/240V. I have one phase of the mains connected to a CT but I cannot fit a…
-
Hi!
First of all thanks for the very good plugin!
Homebridge:0.4.50
Fritz Plugin 0.9.2
FritzBox 7490 with 07.12 FritzOS
It worked for me before I had about 10 devices from my FritzBox showing u…
-
### Finalize
- try: except function?
- Reference: ctrl/antenna
### Power Meter
https://github.com/necst-telescope/necst/blob/27e272bdd1160567b9ecec7f01bed53a9a8c5b78/necst/rx/powermeter.py#L34
…
-
## Environment
- ShellyForHASS release with the issue: 0.1.8
- Last working ShellyForHASS release (if known): It worked great with ShellyForHASS 0.1.8 and Home assistant 0.111.x
- Home Assist…
-
The base arduino swserial has the invert logic.
class SoftwareSerial : public Stream {
public:
SoftwareSerial(int receivePin, int transmitPin, bool inverse_logic = false, unsigned int buffS…
-
Output wattage control (battery charge&inverter output)
webhooks:
Shelly 3EM power meter
…
mqtt:
nodered
…
api:
etc.
-
We have two clusters with 7301 and 7551 CPUs in dual-socket servers. One system uses air cooling, another one uses liquid cooling. Both system runs under SLES12 SP3.
On both system we observe that …
-
Wenn man mehrere WR's /odobs parallel stört anstatt zu kaskadieren, kann das Vorteile haben.
- gleichmäßige Belastung/Abnutzung der WR's
- einzelne WR's laufen seltener über 80% Last -> kontinuierli…