-
When learning, the orange light is on. Long press the remote control and then single-click, but the orange light just flashes for a while, or the orange light remains on all the time,. and the "Broad…
-
From open-register-design-tool created by [neenuprince](https://github.com/neenuprince): Juniper/open-register-design-tool#70
The .jrdl_logic.sv file generates a signal for the HW Read SW write reg…
-
I really want to be able to implement a "sleep mode" for my networks, so that they do not require RF until they have work to do. To help implement this, I need to be able to dynamically turn on and o…
-
I'm using welle.io with SoapySDR, and my device (SDRplay RSP1A) has separate RF and IF gain. The gain slider in welle.io settings seems to be bound to the IF gain setting, and the RF gain seems to be …
-
### The problem
Issue with Home Assistant Broadlink integration. Works fine for configuring a Sony TV remote, and a remote that controls LED candles.
But I also have a ceiling fan that uses a remo…
-
This would allow Robot36 to directly [capture audio](https://developer.android.com/media/platform/av-capture) from another app running on the phone instead of relying on the microphone and speaker to …
-
Hello,
First of all, thank you for this script. I've been running it the last few weeks with a lot of success - I really appreciate the effort.
One little thing. Every time I run it (verbose or …
-
A piece of code would provide an additional menu entry showing peak-to-peak voltage value for the incoming signal. That would make having a scope not necessary to tune the input baseband level. The va…
-
### Describe the bug
I am not sure about whether it is a Hyprland specific bug or not so I also post one here.
After launching waydroid, and moving the focus to another workspaces for a time, wa…
-
No matter how modern, steampunked or deviated from the recommended design :)
I'll kick things off...
Mine has a few substitutions based on what was to hand:
TL072 for the opamp
74HC4052 scavenge…