-
Hello!
There is a router with a pure openwrt (22.03 and 23.05 v), (I haven't made any changes to the default settings yet to verify the problem) the Internet works, other devices recognize the route…
-
### Describe the bug
In master snapshot images (for different device platforms, e.g. ipq40xx, ipq806x etc.), a STA/client can never get any IP address from the uplink if an AP is configured and en…
-
### Describe the bug
STA+AP with automatic channel does not work, even with having the channel width configured at 20 MHz. If I enter the channel manually, it works as expected.
### OpenWrt vers…
-
I am using cloudflare tunnel to route, on the ios app responses get cut short while on the macos app no response is printed...
What info may I provide to better help with diagnosis and resolution o…
-
node-mdns uses the mDNSResponder interface which is pretty much broken on Linux. It looks like no proper mDNS implementation (at least not discovery-wise) for nodejs exists at the moment. I suggest ma…
-
**Describe the bug**
I found that sometimes the wlan0mon isn't being reset when it disappears
**To Reproduce**
Steps to reproduce the behavior:
1. ... uploading pwnagotchi.log so you can see if …
-
**Description**
In docker swarm mode, binding a port to 127.0.0.1 results with the port being open on 0.0.0.0 also. This could be a **severe security issue** and should be explained in the document…
-
**Problem**
The problem: it's limiting to not be able to track things on non-Mac computers.
**Solution**
Reverse-engineer either the local Find My API or the Find My web app and allow for tracking on…
-
### What happened
I added some port forward setting to firewalld, but it has no effect.
### What you expected to happen
Just make it work.
### How to reproduce it (as minimally and precisely as po…
-
I am trying to setup an AP using a raspberry pi and 2 AWUS036ACM, one for 2.4ghz and one for 5ghz. I've tried both a raspberry pi 2 and a 3 with both 5.4.83-v7+ and 5.10.63-v7+ kernels. In each case, …