-
Hi,
There is a pico/pico2 extension for VSC that supports cmake, it would be great if you could port your project. I think you will find that minimal changes have to be made.
Cheers,
Bernie
-
To reproduce, build and flash this code to a Pico (not Pico W because the LED won't blink):
```
#include
#include
#define LED_PIN 25
int main() {
stdio_init_all();
gpio_init(LED…
-
Hello,
When I want to use the pico-hsm as a security module on some specified pico boards to do ECDSA signature.
If other guys dump the pico-hsm firmware of these board and copied the uf2 file to …
ghost updated
2 months ago
-
I've got a new Raspberry Pi Pico 2 RP2350 on the way and wanted to know if It would need any special programming to work with HyperHDR. Any help you can give would be appreciated. Thanks!
-
Hi, I get no video signal when flashing the 11/08/24 update, this particular board had never been updated and I do not know what version came with it but, I went back one commit to 04/08/24 release an…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.2.0-rc.0 on 2024-10-23; SparkFun Pro Micro RP2350 with rp2350a
```
### Code/REPL
```python
import gc
gc.mem_free()
```
### Behavior
…
-
Followed the instruction to lock chip but encounter error when burn lock for OTP_DATA_PAGE1_LOCK1 and OTP_DATA_PAGE2_LOCK1
```
ERROR: Cannot clear bits in OTP row(s): current value 040404, new val…
-
(derived from https://github.com/earlephilhower/arduino-pico/issues/1900)
[Wikipedia says](https://en.wikipedia.org/wiki/Serial_Peripheral_Interface#Clock_polarity_and_phase)
![grafik](https://g…
-
In src/rp2_common/cmsis/stub/CMSIS/Device/RP2350/Include/system_RP2350.h, the file header and the macro definition (_CMSIS_SYSTEM_RP2040_H) still refers to RP2040.
-
To reproduce put the following files in a directory next to the pico-sdk:
CMakeLists.txt: (Note the custom target which runs picotool.)
```
cmake_minimum_required(VERSION 3.16)
include(../pico…