-
### Describe the bug
The otp helper rpi-otp-private-key is written that it should also have support for most legacy hardware as stated in the documentation "Using the One-Time Programmable Memory on …
-
**Describe the bug**
IPv4 based network boot sends arch code 0000 (corresponding to x86 BIOS) making it impossible for the dhcp server to identify the client architecture and send the correct dhcp op…
-
### Checklist
- [X] I am not using this driver from inside a Virtual Machine.
- [X] I performed all of the [installation steps](/README.md#installation-steps) as written.
- [X] I have read the [FAQ](…
-
There is a function being called ofGLESVersionFromGL that tries to parse textual info from glGetString(GL_VERSION); and define which capabilities it has.
I think there are more direct ways of parsin…
-
Having some issues with getting a RAW14 capable MIPI sensor working in Libcamera. The driver is currently under development such that it is possible there are issues on that end, but also looking at s…
-
Does you 3.6" screen display for the RPi work with a 64-bit Debian install or only with Raspian 32 or 64 bit?
-
I have a RPi camera connected to RPi zero 2w on LAN and v4l2rtspserver setup. I am able to receive the video stream on "rtsp://192.168.1.44:8554/unicast", but can't get a connection on "rtsp://rpiz2w1…
-
I have a Raspberry Pi Pico that is attached to a custom board I created that is running SMD sk6812 LEDs. Essentially, my board is working as a VU meter for audio. And the Pico is doing the calculation…
-
I'm trying to run your fantastic RPi3 script on a RPi Zero Raspian (just INDI, no PHD2 or viewer). It's better to set:
-j $(expr $(nproc) + 2)
as
-j 1
Thoughout, otherwise stuff hangs. …
-
### Summary
```
error: linking with `rust-lld` failed: exit status: 1
|
= note: LC_ALL="C" PATH="/home/runner/.rustup/toolchains/nightly-2024-05-20-x86_64-unknown-linux-gnu/lib/rustlib/x86_6…