-
## Platform
I’m using:
* [ ] gokrazy/rpi3b
* [x] gokrazy/rpi3b+
* [ ] gokrazy/rpi4b
* [ ] gokrazy/apu2c4
* [ ] gokrazy/x86-64
## Observed behavior
I want to use a TLS certificate I get…
-
I tried installing ROS manually using the steps described in the Dockerfile for melodic-ros-core-alpine, the following step is failing:
`rosdep install -y --from-paths src --ignore-src`
When tryin…
-
Hey, I'm running Kerberos on docker on a Rpi3b. Usually it idles around 10-20%, apart from occasions when other processes are running. But it looks like every so often it goes above 40% and stays at t…
-
I'm currently trying to figure out a way to use a wyoming satelite for MIC and openwake word process and a second wyoming satelite for playback.
I have a RPI5 acting as a display for home assistan…
-
This is an intermittent problem. Can't ping the Zero's unless they have an IP Address in the same subnet as the controller. This issue varies, but I'm always using the same RPi 3b with 32GB SD. The…
-
This is a great plugin. That works fine with my with my RPi3b+ and Waveshare 5inch HDMI LCD(B). Only the calibration for the pen is bad. I can not get to the corners. So it will be good idea to have a…
-
Can anyone provide output setting and other parameteres to be used to playout to rtmp streeam using Hard ware accerleration using h264_v4l2m2m for rpi3b
-
This is just a note that if trying to install on RPi Bullseye, the version of opencv installed using
```
sudo apt install libopencv-dev
```
is 4.5.1 (as of 2023/01/10), and is known to break many…
-
Tks this project. work perfect with sx1278 with rpi3b and arduino. I had test.
I have find a bug. sometimes can't received. but sometime OK!. Maybe problem is default timeout too small. need increa…
-
Good morning,
this looks interesting.
Is this what I would put on the remote box if I want to put the GSM/SMS stick on a separate box from my home-assistant box? If it matters the remote box is …