-
Hi,
I have the "smearing" effect and want to try to solve it by adding
rtsp_over_tcp: true tio the stream url.
But as soon as I do, the pi will show the command and nothing else.
I use the Unif…
-
Is there a method of cycling through a number of grids of cameras. e.g. 2x2 grid every 5 seconds for 12 cameras total, then cycle back?
If not, what would be the best way to go about doing this?
-
At first: Thank you for nice job!
I am working quite while in video Surveillance field, so few comments from my experience. I do not like rpisurv 2.0, it is slower (if use just one screen and to co…
-
Using omxplayer on raspbian, i can get mjpeg streams to play from command line with a http cgi address:
http://192.168.1.45:2080/videostream.cgi
Is there a way to add this to /etc/ripsurv confi…
-
Hi Rpisurv fails to start i get the following error
sudo systemctl status rpisurv
● rpisurv.service - Rpisurv Raspberry Pi Surveillance
Loaded: loaded (/etc/systemd/system/rpisurv.service; en…
-
I am trying to stream from cameras that are connected to an NVR. I have tested the rtsp url in VLC and it opens successfully but when I put the same URL into the RPISURV confing it fails to open. I si…
-
as i cloned the repository today,
the default config in /etc/rpisruv has option like:
https://raw.githubusercontent.com/SvenVD/rpisurv/master/surveillance/conf/surveillance.yml
```- rtsp_url: "pa…
ozett updated
5 years ago
-
i did a fresh raspian-install on a new sdcard,
cloned the repository today, like told on the github homepage,
than it failed to start.
if i call it as root directly, it got an errormessage. see b…
ozett updated
5 years ago
-
Does it need the desktop version or can it be used on Raspbian Lite?
Also DietPi would be great.
-
previous version was working fine after upgrade cat see y cameras
Sep 22 07:16:39 raspberrypi systemd[1]: rpisurv.service: Failed with result 'exi
lines 1-7/7 (END)...skipping...
● rpisurv.service …