-
### The problem
i have tried a lot of different ways but none of them work on windows and on a raspberry pi
- via https://web.esphome.io/ able to install and configure wifi but no logs or device…
-
Hello,
I flashed my motion sensor and after the reboot, led are turned on for some seconds. But no movement seems to be detected because the blue leds stay off and I receive no event in ESPHome Das…
-
### Enhancement Summary
Help for setting up BME680 Humidity/Temp and Gassensor inside NSPanel
### Detailed Description
I install a BME680 Sesor inside the NS Panel for acurate Humidity and Te…
-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to …
-
The basic sensor board should be designed based on a 70x90mm (26x31) perfboard. The board should contain the Blue Pill STM32 board, the RFM69 connector and a button. A I2C or analog sensor will be add…
-
Hallo Wolfgang,
ich hab mir ein neues Spielzeug gekauft.
Wahoo Blue SC:
http://eu.wahoofitness.com/wahoo-blue-sc-speed-and-cadence-sensor.html
Damit bekomme ich TCX Dateien, die auch Geschwindig…
-
**Describe the problem you have/What new integration you would like**
I would like the [m5stack-atoms3](https://docs.platformio.org/en/latest/boards/espressif32/m5stack-atoms3.html) to be suppo…
-
- Arduino board: ESP32
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.16
- List the steps to reproduce the problem below:
In any condition a call to apds.calculateLux …
-
### The problem
Edit: made a few changes and ran more tests after noticing additional device classes and measurement types, but the issue persists. Please see the additional comment that follows.
…
-
I think the relation between sensor and user could be enhanced significantly if the sensor provides actual live information without referring to the map website.
This could be achived via RGB LED(s…