-
Hi, I'm getting strange behavior on my nozzle fan.
M106 - Set Fan Speed command only works BEFORE print but doesn't do anything while printing or after the print.
so if I turn printer on, then iss…
-
After following steps outlined [Here](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/241#issuecomment-639149248) the speaker/beeper on my Ender 3's screen sounds EXTREMELY harsh like na…
-
Dont know if this belgons here but i see no other way as how to report this. I recently purchased the new Sprite pro extruder, and after installing everything correctly and checking everything three t…
-
Hello
I'm trying to upload the bootloader on a SKR MINI E3 V3 i download the file and plug the bord via ST-Link and try to upload but when i do Program and Verify it says Canot disable Read Out Pr…
-
**Describe the solution you'd like**
A prebuild firmware for the 5 plus. Marlin has a example for the 5 plus, but the skr mini E3 v2 is just joined in the ender 5.
If someone with a good understandi…
-
hi
can i used servomotor panasonic with bigtreetech skr e3 v2.0 !? and how !!
-
Upgraded from SKR Mini E3 V2.0
Marlin 2.0.7.1
Will not hold temp stable, fluctuates by nearly 10 degrees.
Tried PID Tune and it makes it MUCH worse. Won't even reach set temp if I try PID Autotun…
-
Using BTT SKR MINI E3 V2.0 + BTT TFT35 V3.0 on Ender 5 Plus
Was working for a few days, no issue. Suddenly Part Cooling FAN0 is on at 100% all the time and cannot be controlled by screen, BTT Mode or…
-
### Description
### Steps to reproduce
1. [Installed BLTouch 3.1 to Ender 3 pro]
2. [Keeping all endstops wired and connecting BLTouch to z-probe port]
3. [Download BLTouch firmware. and…
-
Hello,
I connected relay with BTT SKR MINI E3 V1.2 by PT-DET.
After around 15 second after I on my printer relay automatically turn off printer.
Is there any solve of this issue?