-
I've been printing successfully with my ercf v2 rc1 since Christmas-ish, with a 0.4mm nozzle and gear sync turned on.
I've just started trying to do large format (single colour) prints with a 0.8mm…
-
### Description
TFT display shows some strange errors and prints are always failed.
Printer is ENDER 3 pro with SKR mini E3 3.0, smart filament sensor and BLtouch
### Steps to reproduce
pr…
-
Making a element as the stepper motor but with 2 limit switches
At present the number of steps is fixed at 14000 from limit to limit
![stepperlimits](https://user-images.githubusercontent.com/62…
-
Ordered for testing:
**Drivers:**
[A4988](https://www.amazon.com/gp/product/B07BND65C8/)
[TMC2209 V1.3](https://www.amazon.com/gp/product/B07ZPYKL46/)
[DM556](https://www.amazon.com/gp/product/B…
-
Is this suport 4 corner actuactor, withsurge and 2 TL rear and front?
I want to used simhub motion.
And it suport step/dir??
Iam planing to try first with stepper motor. Bacause iam project make…
-
### What happened
Printed tall object and bed was at 500mm when complete and powered the printer off for the day. The next day I re-homed the printer and it crashed in to the stepper motors.
Th…
-
I am having problem with homing all my stepper motors. Although I have three motors connected to [stepper_x], [stepper_y], and [stepper_z] respectively. The initial error I got was "Endstop x still tr…
-
Hi, thanks for the board, very nice idea!
I'm facing the issue with a very slow moving stepper motor. If I follow your pwm example, the stepper (with an tb6600) moves very slow. I tested each setti…
-
Been using autotune for months now to full satisfaction. But after updating to commit 1de500c, my Z motors are making a lot more noise. For one of my Voron 2.4 Z motors, from my printer.cfg:
[stepp…
-
Hello - I'm testing the TMC2209 BIGTREETECH v 1.3 drivers without UART config and no matter which microstepping option I set via MS1/MS2 pins or what potentiometer value I set (tested max clockwise / …