-
**Note**: we will create a dedicated project board for DevFest.
Following is the rough outline of work areas for DevFest 2023:
1. **Define Conference Tracks**:
- Identify key themes for each tra…
-
## Alarm system
EVO192, FW is 6.86 , connection method is Serial over IP with ESP8266 -->
## Environment
##Configuration
```
LOGGING_FILE: null
LOGGING_LEVEL_CONSOLE: 20
LOGGING_LEVEL_F…
-
Later S2x6 games would use a USB-Ethernet adapter likely to replace iLink. There are some cases where it's used to connect to an online server but server emulation would be up to someone else. Here is…
-
@AILIFE4798 , i have begun to implement the `SerialServer2HoverConfig` struct you already imported with remoteUartBus.c
```
case 2:
{
SerialServer2HoverConfig* pData = (SerialServe…
-
### The problem
I have one of the newer 2.9 inch V2 e-ink devices (v2 sticker with rev2.1) and I'm trying to make it work with ESPHome.
Partial update works fine (with slight haze, as to be expect…
-
Hi @emard,
thank you for creating such a good ulx3s guide.
I did get the LAN8720 module to try out ethernet on the ulx3s.
First of all is there anything I need to bear in mind regarding the pyhsi…
-
### Is this a feature relevant to companion itself, and not a module?
- [X] I believe this to be a feature for companion, not a module
### Is there an existing issue for this?
- [X] I have searched…
-
[My own analysis of both f-machine devices](https://github.com/Furikuda/RFmachine/blob/main/NOTES.md) shows that I have a very different set of results from what @lockedmouse described via #92
The m…
-
Hello. I notice there is no guide for SSC333 however there are references to it in the source code. Does this mean that it could still work (unofficially) if I build the firmware myself? Is there any …
-
the back panel has 2 cables going in:
![image](https://github.com/user-attachments/assets/a9b8dbf4-9361-4ee6-9921-3eac3d8c19d5)
in one corner, i see this sticker
![image](https://github.com/user-…