-
```
Some code parts in the I2C sensor code are not sign safe, eeprom code need a
minor change. See
http://aeroquad.com/showthread.php?2800-Porting-AeroQuad-code-from-AVR-to-STM32-
CPUs for details an…
-
Pardon my noob question. But will it be easy to use the library on STM32F103?
-
I want to install the Katapult bootloader to make it easy to update the klipper firmware, then deploy updates to klipper firmware via katapult. I flashed katapult with the following options:
Enable…
-
Добрый день.
Почему в Mishka AI используется отдельный чип BT и отдельный контроллер STM32?
От чего не собрали это всё на одном esp32?
Наверху, над stm32 отладочный uart?
-
file:Documentation/InfineonAIROC-Wi-Fi-Bluetooth-STM32ExpansionPack_UserGuide.pdf
position:2.2.2 Add the Pack from URL/5. Input the GitHub URL to PDSC-file
original path:https://github.com/Infineon/…
-
### Is your feature request related to a problem? Please describe.
There is a bit of information on the Trigorilla Pro board, and it seems practical to implement this. There's a nice pin debug syst…
-
Самого доброго времени суток, выражаю благодарность за ваш труб в создании такой прошивки.
Проблема:
1)устанавливаю готовую прошивку, при включении срабатывает проверка bluetouch, ставлю autohome,…
-
随着代码结构的完善,越来越希望代码更加智能化,调参的步骤越少越好,要是啥也不用调就更好了。。。
回忆起以往看过的代码,感觉智能化第一步就是搞定flash读写。有了flash之后,一切都变得很方便了。
比如每辆车的电机安装方式不一样,那么云台中间位置就不一样,如果有了flash,直接运行校准程序,云台左右分别碰到限位开关,自动计算出中间位置,pitch轴直接用手扶正,靠陀螺仪判断是否水平…
-
Hello,
Using standard sdfat lib with stm32 on arduino,
when sdcard is bad quality if finish to cause arduino crash,
or
if using genuine sandisk and removing it from the slot cause arduino c…
-
Hello
I'm new here and trying to figure out how to code in DCS BIOS using the STM32 extension for an f-16 cockpit, I'm currently using the dcs-bios-arduino-library-0.3.9.
After I compile the code …