-
since i don't know how the HAL works, i thought i'd say my ideas for now.
USB:
selectable USB modes (raw hid, flash storage, MIDI instument)
MPU:
MPU support
SPI:
DMA support
16bit transfers
32bi…
-
Hi guys,
I tried to use this driver with RTFM for stm32l475 (the Discovery kit for IoT node, stm32l4) and i get BusError(Nack):
```
let scl = gpiob.pb10.into_open_drain_output(&mut gpiob.moder…
-
Hi,
A question about the function getVBUS.
I am using a Grasshopper board (LoRa), powered with two 1.5 batteries which give 3.2V. I am powering it through the LDO voltage regulator.
I would lik…
-
@GrumpyOldPizza,
I'm using a dragonfly like board designed by Kris and we used PA15 as output to enable a LDO via an enable pin. We have placed a pull down on PA15 so at reset state the device behi…
-
Some context: I'm using stm32ral and have found some SVD bugs which I'd like to fix (stm32l4+ sdmmc peripheral). I'm planning to submit a PR to stm32-rs for this after I finish testing it.
While …
-
Something seems to be off.
When writing on registers using the following code, the results tells the the read/write from won't work unless I go hardcore on `ptr::read` or `ptr::write`.
Maybe I'm…
-
It's really cool to see a simple keyboard FW implemented in rust, that is pretty amazing level of functionality with so little code. Mad respect.
I did a similar project but used QMK and a Teensie:…
-
implement multitasking!
this requires:
1. [x] a scheduler (system timer running at a regular time unit to pre-empt tasks)
2. [x] code to context switch processes (once i figure this out i'll wr…
paked updated
3 years ago
-
Need to finish following parts for release:
- [x] UART #18
- [ ] I2C
- [ ] DMA
- [x] Wait svd 0.14.0? https://github.com/brandonedens/stm32l4x6/pull/5
- [ ] Merge with https://github.com/Mabez…
-
hi there, first off thanks for putting this tap together, it's exactly what i needed! secondly, i think i'm probably doing something wrong but i don't think i'm doing anything odd and i'm new to this …