-
I followed a guide with much blind hope, I should have been a bit more cautious. How can I backup the stock firmware before trying another stick?
What I did:
sudo -s
apt install android-tools-adb…
-
Before the functions tied to the Linux side of the board will work, we need some software running on it to communicate with the Pi. This is also a vital prerequisite for #1 so we can do this plug-and-…
-
I am trying to compile stock firmware for octopus pro v1.1 in Platformio.
Getting the error:
'PinMap_SD' was not declared in this scope; did you mean 'PinMap_USB'?
Clean Marlin 2.1.2.1 compiles o…
-
Hey there, guys. The title is self-explanatory, but here it is
my router was shipped with the 3.2.30 firmware, and it was the English/global version. I tried to flash the latest OpenWrt, albeit for t…
-
Hi!
Thank you for your hard work and dedication to the community.
I apologize in advance, but I did not find another way to contact. The other day I received a stick and while I put experiments.
Wi…
-
Bltouch does not work properly constantly gives different offset values Evan when done back to back , destroyed my print bed , ill stick to mainline klipper and use one firmware to proz z offset , th…
-
On egzumer 0.22 tx sensitivity on UHF -119db, but on stock was 126-127db. Would be nice if in the next relises sensitivity come back to stock firmware results
-
### Troubleshooting Guide
- [X] I have followed the steps in the troubleshooting guide and my issue is either not listed or is not solved.
### Description
Package version is "unknown" in web interf…
35gh updated
2 months ago
-
### Troubleshooting Guide
- [X] I have followed the steps in the troubleshooting guide and my issue is either not listed or is not solved.
### Description
The following warning are printed in…
35gh updated
2 months ago
-
Would it be possible to use DIY mode for stock firmware 3.3 or higher?
https://github.com/itead/Sonoff_Devices_DIY_Tools/blob/a337e85aeda254e64018a60ce1dd439e75db2a0b/other/SONOFF%20DIY%20MODE%20Pr…