-
Hello I use the SX1268 Module but Compilation will fail.
Screenshot of the error message :https://imgur.com/a/owSg9Ks
fail message :'class SX1268' has no member named 'clearDio0Action'
-
Hardware : [ESP32 Lora board](https://easyeda.com/GabeH/esp32-lora-aprs) design by myself ([BV5DJ](https://www.qrz.com/db/bv5dj))
Lora : E22 SX1268
config: server mode (APRS-IS gate mode)
ERR:
…
-
Hello.
Recently, the problem with the lack of support for c1268 chips was found out. (https://meshtastic.discourse.group/t/sx1268-modules-are-not-yet-supported/3659/4)
A colleague of mine did suppor…
-
RadioLib supports AX.25 as of update 3.3.0, it should be possible to add support for APRS as well.
-
Is there a way to port this code to ESP-IDF to run RNode on a TTGO T-Beam or like ESP32 based LoRa device?
Cheers
Stephan
-
hey! i look at your micropySX126X drivers in 2days ago . but i want know how to working that ? if all files push down to mpy-boards . like pyboard_v1.1 . it's not working! return msg say : no memory .…
-
Thank you for your wonderful work on codec2.
Can you please add support for newer LoRa chips mentioned above. There is a library with lot of examples which support all of these chips and old chips …
-
SX1261: PRAM version: SX1268 V2F 2F06
SX1261: PRAM version: SX1268 V2F 2F06
ERROR: SX1261 PRAM version mismatch (got:2F06 expected:2D06)
ERROR: failed to patch sx1261 radio for LBT/Spectral Scan
-
Hi,
After its last correction in the RFM22 or Si4432 module, the problem that arose now ,
in any example is that it does not cut the carrier, once the transmission is finished.
**IMPORTANT: C…
-
Great project.
I would like to test some modules from Ebyte based on Semtech SX1280 chip. There is library supporting this chip at https://github.com/StuartsProjects/SX12XX-LoRa.
Is it possible …