-
Hi!
I enabled PTP mode on the NX500 camera and see the green dots on the left side. Windows sees the camera as a disk and allows to copy files. Is it possible to use the camera as a webcam? Unfortuna…
qo4on updated
3 years ago
-
This is the Fuji X-T2 camera. I'll look into USB communication details next.
$ lsusb | grep Fuji
Bus 004 Device 004: ID 04cb:02cd Fuji Photo Film Co., Ltd
```diff
--- a/camlibs/ptp2/library.c…
-
https://wechatscope.jmsc.hku.hk/api/html?fn=gh_5189ed7a15c7_2021-04-26_2651306972_AJcv2ntp18.y.tar.gz
-
Hello,
After the update from 2.6 to 3.0 i cannot import images via cable from my Olympus E-M 10 Mark II. The images are "imported" but corrupted. The focal length is f/0.0 and no preview is available…
-
I've tried execpl, system, even executing chmod(const char *pathname, mode_t mode) in the code but nothing seems to work.
I do get getuid() == 0, but I can't do anything with that privilege.
EDIT: M…
-
**Describe the bug**
I installed gphoto2, it can see my camera with gphoto --auto-detect
```
Model Port
----------------------------------------------------------
Fuj…
dantz updated
4 years ago
-
#### What were you doing?
I want to print this: https://www.thingiverse.com/thing:2105393
It works with 1.3.8 but not with 1.3.9
#### What did you expect to happen?
A good and smoo…
-
did you capture RAW images and then use a photoediting software to generate gamma corrected png images?
-
### Bug Description
I am upgrading some old 3D printers with Re-ARM and the reprap discount smart controller LCD will detect but not read files saved to the SD card. Basically, the machine wi…
-
**The issue:**
In the lighttable view, if a camera is already detected, the cable is removed, reinserted and I click on "scan for devices", it will be listed a second time. and a third, fourth times,…