-
I got a few Gosund SP 111 and SP 112 (two). I had no problem flashing the SP 111 using tuyu-convert.
The SP112 are failing with Sending SmartConfig over and over.
From my smarthack-psk.log:
…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Hassio
**ESP (ESP32/ESP8266, Board/Sonoff):**
ESP8266
**Affected component:**
https://esphome.io/components/binary_sens…
-
In an attempt to convert a bakibo light bulb (rgb) I get "Device did not appear with the intermediate firmware".
Installed tuya-convert on raspberry, start_flash starts correctly (vtrust wifi ap visi…
-
New to tuya-convert.
I just tried flashing a Aoyococr X10S using docker on a Raspberry Pi 3 running Void Linux. It didn't work. (I know that Void is not a supported platform, this was just an exper…
-
I did my first OTA flash of tasmota today and I fear I bricked my device. Everything seemed to go fine but now it does not work.
This is my first tasmota flash and I am very much a newbie to usi…
-
Hi, I'm having trouble flashing a [Nooie LB127 Smart Led Bulb](https://www.amazon.com/Dimmable-Multicolor-Compatible-Required-Equivalent/dp/B07X1KYSBJ).
I tried both the dockerized version and the …
-
**Have you looked for this feature in other issues and in the docs?**
Yes
**Is your feature request related to a problem? Please describe.**
This issue is opened to track progress for the sup…
-
Can the bellows library be made to support newer EZSP serial protocol such as EZSP v6, v7, and v8 when used with ZNet 6.x on Silicon Labs EFR32 (Mighty Gecko family) based Zigbee radio adapters?
Se…
Hedda updated
3 years ago
-
Occasionally a light (mostly a Tradfri GU10) gets unavailable in the Phoscon app and can not be switched off/on via Phoscon (or HASS). Using deCONZ 2.05.55 and firmware 262F0500 on the Conbee now, but…
-
Hi all,
I did succeed in flashing a device with the new tuya sdk with tuya-convert.
Changes needed are in my own fork, for reference
https://github.com/M4dmartig4n/tuya-convert
It is not rea…