-
### The problem
The caramas stopped working after update to Core 2022.6.1
It seems that after a reboot the cameras will work for a few minutes, but then I get the following error in the log and th…
-
### The problem
I have Unifi Protect G4 Pro cameras and the detected object sensors are not properly showing 'person' or 'vehicle' events properly in HA. I keep only see events in the Logbook and Hi…
-
### The problem
I am having an issue with the UniFi Protect integration. I recently switch from a DreamMachine Pro to the DreamMachine SE. Because of the switch, I had to reintegrate the cameras. Pre…
-
### The problem
The integration fails to load,
### What version of Home Assistant Core has the issue?
core-2023.11.0
### What was the last working version of Home Assistant Core?
unknown
### Wh…
-
### Homebridge Ratgdo
v2.1.3
### Homebridge Platform and OS
Raspberry Pi
### Homebridge Version
v4.56.2
### Node Version
v20.13.1
### Ratgdo ESPHome Firmware Version
v2024.4.2
### Describe t…
-
Following on from: https://github.com/AlexxIT/WebRTC/issues/674
Camera streams started failing directly after upgrade to Unifi Protect version: 3.0.22 from 2.x.x
Camera stream in Home Assistant …
-
### The problem
The integration works great, but is causing stress on the UDM to the level where its not operating properly anymore.
![Capture](https://github.com/home-assistant/core/assets/53369648…
-
### The problem
After update to 3.0.22 cameras instantly became unavailable, on rebooting HA integration shows as failed.
### What version of Home Assistant Core has the issue?
2024.3.1
### Wh…
-
### Homebridge UniFi Protect Version
6.16.0
### Homebridge Platform and OS
Ubuntu 20.04.6 LTS
### Homebridge Version
1.7.0
### Node Version
18.19.0
### UniFi OS Version
3.1.16
### UniFi Prot…
-
### The problem
Not entirely sure what’s causing it, but I’m getting continuous errors from the unifi protect integration with the error: Auth error while updating. As far as I can tell the integrati…