-
System Information
- NCS 2
- Raspberry pi 3 (1GB)
- Raspbian os 11 bullseye
- 32-bit (armv7l)
- Problem classification -> Installation
Hello,
I am unable to initialise OPENVINO ENVIRONMEN…
-
### Describe the bug
Following the steps for [building on macOS](https://github.com/raspberrypi/usbboot?tab=readme-ov-file#macos) I get the following error when running `make`:
```sh
$ make
cc -…
-
**Device Information | 设备信息**
- SOC: [rk3399]
- Model [firefly rk3399]
我尝试着使用 `openwrt_official_rockchip_tvi3315a_k6.1.57_2023.10.13.img` 写入到 tf 卡上，然后挂载 `/boot` 分区修改 `armbianEnv.txt` 将 `fdtfile…
-
After installing maia-sdr firmware from release as [instruction](https://maia-sdr.org/installation/) describes i cannot record spectrogram. Running `./maia-httpd` from `/root` directory returns this e…
-
```
root@canby:/var/tmp# wget https://dist1.8086.net/clusterctrl/usbboot/bullseye/2023-05-03/2023-05-03-4-bullseye-ClusterCTRL-arm64-lite-usbboot.tar.xz
--2023-07-01 14:30:11-- https://dist1.8086.n…
-
Hi,
we have been using the CM-Provision for quite a while now and it is a great tool. Thank you for that!
We never had any problems provisioning our CM4 modules until a few weeks ago. Since the …
-
Hello,
Basically the same issue that has been written about here: https://github.com/raspberrypi/rpi-imager/issues/289
However using CM4 and the built in EMMC (CM4102016)
Writes to the emmc, ge…
-
### Describe the bug
After starting either rpiboot.exe or rpi-mass-storage-gadget.bat, the CM4 is not being recognized and gets stuck, see screenshot:
![image](https://github.com/raspberrypi/usbboot…
-
In the meantime, while the other issue is being discussed:
What I want to do with this E310 is basically direction finding. For this purpose, I am using the latest firmware (https://github.com/Micr…
-
I've successfully extracted and decrypted the m0800 module from P3X firmware bins, but don't see an equivalent module in P3S or P3S firmware bins.
Can I simply use the u-boot, ulmage and ubl_297m_1…