-
Add wake-on-lan so that a sleeping node could be used when more
transcodering power is required.
The command to WOL is;
wakeonlan -i 192.168.44.255 00:0e:c4:d4:d1:c6
command (-i interface…
-
After I installed April 2018 update, no systems show as online, except the machine that I'm on. They show in network neighborhood, but are not available in Wake On LAN. It's like WOL can't see the I…
-
So I'm confused. Locally WOL worked fine from one PC to another. I then set up my router to forward UDP port 9 to the local static IP of a PC 192.168.0.231. Here at a remote location PC I set up WOL u…
-
I tried to shutdown my Linux Computer in the Local Network with the given example and replaced it with my own.
In German the Error Code says: Datei nicht gefunden
what means something like: file …
-
Just installed a Raspberry Pi2 with the latest xbian image. Couldn't get WakeOnAccess to work. It never found my fileserver, even when it was already running. A little sniffing with Wireshark revealed…
-
### Requirements
- [X] I checked the troubleshooting section in the README to verify that I have the latest Mushroom version.
- [X] I did a search to see if there is a similar issue or if a pull requ…
-
Is there a function that can turn the TV on? I read the documentation and couldn't find anything like this, maybe it's an upcoming feature? I just thought that you wouldn't want to have to get your re…
-
Hi there,
so I updated WOL to the newest version via the installer in the "about" section. After the installation, it does not start any more and shows me an error message (see below).
Hope, you…
hc-ac updated
5 years ago
-
We noticed that enabling our HPE OfficeConnect's managed switch AutoDoS function prevents WOL's magic packet from reaching the destination computer (using Broadcast IP). Further testing revealed that …
-
Send a Wake On Lan packet to a predefined device. maybe add the possibility of setting a minimum wait time.