-
*Alfredoredo:*
- Device: TP-Link RE450 v3
- OpenWRT-version: OpenWRT SNAPSHOT r14198-da98603597 (snapshot from 8/19/2020)
- Installed packages: Just the base install + LuCI
- Steps to reproduce:…
-
### Describe the bug
With USB Wifi devices including the CF-953AX (mt7921au) random hangs can occur when used with RPi. The hangs occur under heavy load, for example when operating the device as acce…
-
### Describe the bug
## 设备或固件信息
1. 设备型号：AMI Corporation Aptio CRB
2. 架构：Intel(R) Celeron(R) CPU N2815 @ 1.86GHz x 2C 2T (2132.800MHz, 40.0°C)
3. 目标平台：x86/64
4. 固件版本： ImmortalWrt 23.05-SNA…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
evoon updated
1 month ago
-
With LEDE and latest mwlwifi driver on WRT3200ACM-EU version the power table and available channels are different from the latest Linksys stock software. It would either suggest that the power table c…
-
*re-bob:*
Supply the following if possible:
- Device problem occurs on
TL WDR3600 v1
- Software versions of OpenWrt/LEDE release, packages, etc.
OpenWrt 19.07.4 r11208-ce6496d796 / LuCI openwr…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I am trying to setup an AP using a raspberry pi and 2 AWUS036ACM, one for 2.4ghz and one for 5ghz. I've tried both a raspberry pi 2 and a 3 with both 5.4.83-v7+ and 5.10.63-v7+ kernels. In each case, …
-
Hello,
I've been testing quite a lot lately with Atheros wifi cards that use the ath9k_htc firmware.
As a background: These cards are used for a project that uses monitor mode and pcap packet inject…
-
### Describe the bug
https://forum.openwrt.org/t/hap-ac2-ipq4018-hostapd-dynamic-vlans/170666/
ipv4 dhcp and ipv6 slaac does not work on ATH10K bonded to DSA bridge
only static ipv4 will work
de…