-
I’d like to create a device using the helium console API.
The documentation says that the POST request must contains `name`, `app_eui`, `app_key` and `dev_eui`. No problem with the `dev_eui` and `…
-
Hi @ddB0515,
What is the actual production cost ?
Have you been able to recently have some boards made ?
Have you tried connecting E-Paper or LoRa devices at all yet ?
Here is a DIY Mesh…
-
"**staging**" console as production was not allowing join at the time.
ADR is enabled at both the staging console and the device side.
At device join time the downlink containing the Link-Adr-Req …
-
Hello,
For us915 i would like to know these informations. I didnt find it on the lib.
Rx1 Delay, Rx1 DR offset, RX2 DR, RX2 Frequency, Factory-preset Frequecies
ABP is working but not OTA, so…
-
Within the README at https://github.com/RAKWireless/WisBlock/tree/master/bootloader/RAK4630
the link to the bootloader is broken. Looks like it was not changed when the files were moved
It's the "h…
-
I'm in Perth Australia on AU915 with only a Sensecap in range, and using a 3rd party sensor I can't configure or modify.
It works fine on TTS, but on Helium in the console, almost every uplink appear…
-
Using a wisblock mapping device (was working all day; no code touched; no power-cycle) started getting a broken integration returning a 400 error with "{\"error\":\"Missing Field: latitude\"}".
Dev…
-
Using US915 Hotspot
{
"channel": 114,
"frequency": 925.1,
"id": "112DnKkS5qVvRoK1TFcbhT7ReezwtNTVmE2zTB2ZnAa3UMZYJ8kN",
"lat": 32.9550615760182,
"long": -96.75233778326856,
"name"…
-
Schematic is outdated. For example there is no modem wwan led on the board or it's not connected. Please update schematic!
-
### Subject of the issue
Compilation for nRF52 BSP fails with error.
### Your workbench
* GNSS breakout: [RAKwireless WisBlock RAK12500](https://docs.rakwireless.com/Product-Categories/WisBlock…