-
Hi,
Thanks a lot for this elegant solution.
I'm testing the listen.py on my LEDE router and it seems to work fine (dont forget to add the new Amazon url: dash-button-eu-aws-opf.amazon.com in your dn…
-
## CVE-2019-14815 - High Severity Vulnerability
Vulnerable Libraries - linux-stable-rtv4.1.33, linux-stable-rtv4.1.33
Vulnerability Details
A vulnerability was found in Linux Kernel, whe…
-
## CVE-2019-14815 - High Severity Vulnerability
Vulnerable Libraries - linux-stable-rtv4.1.33, linux-stable-rtv4.1.33
Vulnerability Details
A vulnerability was found in Linux Kernel, whe…
-
## CVE-2019-14815 - High Severity Vulnerability
Vulnerable Libraries - linux-stable-rtv4.1.33, linux-stable-rtv4.1.33
Vulnerability Details
A vulnerability was found in Linux Kernel, whe…
-
2 Accesspoints 1 arch linux with aseauth package(mesh0) and 1 openwrt 15(mesh1)
meshpint0:
# iw mesh0 station dump
Station 00:23:eb:2c:fc:42 (on mesh0)
inactive time: 76 ms
rx bytes…
-
Hello guys, i have a TPLink T3U Plus (88x2bu). I can use these channels:
36 - 64
100 - 140
But not sure, if i'm using the best configs for this adapter, specially for those higher channels.
My c…
-
## occi wifi connect
/boot/occidentalis.txt
```
ostname=hmepi
wifi_ssid=
wifi_password=
```
## wifi ap mode
### /etc/network/interfaces
#### origin
```
auto lo
iface lo inet loopback
iface eth0 in…
-
Hello!
I have a problem with my mt7915.
MT7915 card(tested both on dbdc and non-dbdc versions) card is set as an access point (hostapd).
All clients are able to connect and communicate to AP ho…
-
*sljansen:*
I did an upgrade on a WRT1900acs v2 router (my backup router) that was running 18.06.4 (I think) via LuCI using the image "openwrt-19.07.0-rc1-mvebu-cortexa9-linksys_wrt1900acs-squashfs-s…
-
22.03.0 / TPLink C7 V5
R/T graph displays high SNR on the 2.45GHz band with no associated STAs. The LED also flashes rapidly. For the 5GHz the SNR is within the expected range.