-
### The problem
_Note: This issue appears to be identical to the problem described [issue #47114](https://github.com/home-assistant/core/issues/47114). If you find it more appropriate to close the …
-
### Problem description
Hello like to get the Smartthings 2019 plug working in ZHA properly power readings and on off works but voltage, current and energy kwh are not working.
Energy gets readi…
-
Hi! How I can change update interval in ZHA?
-
### The problem
I am using ZHA with my ZigBee devices, which all happen to be from IKEA. Up to and including core 2023.3.3, I was able to see if the firmware of my ZigBee devices were Up-to-date or n…
-
Hi folks,
I'm having some issues pairing LEDVANCE MotionSensor+ devices using Home Assistant Zigbee integration.
It starts fine with detecting the device but during "configuration" there is no…
-
Bonjour,
Avant tout, j'ai essayé de suivre toutes les discussions ici mais c'est vraiment compliqué. Les instructions du readme concernant ZHA sont elles à jour? -> Y aurait-il des étapes que j'aurai…
-
### Problem description
Hi, I can't find any quirks working on that device it's not working with the ts0601_siren.py
this is my config :
zha:
zigpy_config:
database_path: /zigbee.db
…
-
I added two new TS0201 and their model name was not set to "TS0201-z" as I expected, but to "�z" (copy & paste from Home Assistant probably made it worse).
If I check the two new sensors, their inf…
-
### The problem
For the last few weeks to months, I have been having issues with my HA becoming unavailable. I replaced the power supply as I read that may be the culprit. However, I am still having …
-
### Blueprint name
Controller - IKEA E2001/E2002 STYRBAR Remote control
### Home Assistant Core Version
2024.1.6
### Home Assistant Installation Type
Home Assistant Operating System
…