-
Hi,
I'm trying to make the Digi Shield work on a raspberry 3. I have tryed to connect the the shield equiped with Xbee PRO S2C Zigbee antenna with both GPIO and USB but I'm not able to read recived…
-
### What happened?
The switch is recognised as an 067772.
I can switch on/off the light but I can't vary the light intensity: I have an error message :
`Publish 'set' 'device_mode' to '0x0004…
-
Hallo hobbyquaker,
ich habe die aktuelle redmatic version geupdatet, jedoch verbindet zigbee sich nicht mehr mit dem Stick im node steht nur closed.
ein neustart der zentrale hab ich schon durch…
-
are you able to add support for em3587 Bitronvideo BV 2010/10. https://github.com/grobasoz/zigbee-firmware/issues/15 links to the correct firmware and i was able to get it flashed by your code if i e…
-
It looks like there is a new version 7.4.4 (and there is also an 8.0.0) available.
Should they be added to firmware_build folder?
https://www.silabs.com/documents/public/release-notes/emberznet-…
-
### Problem description
- Motion is always stuck in detected
- Dim and bright is not reported
### Solution description
Make motion work properly, add the dim and bright values
### Devic…
-
### Problem description
TS0601
_TZE200_vdiuwbkq
Appears to be an "updated" version of the "Zemismart Chain Roller Shades Driver": https://zigbee.blakadder.com/Zemismart_M515EGB.html
Purchase…
-
### What happened?
Trying to upgrade Home Assistant Zigbee2MQTT add-on v1.35.3-1 to 1.40.1-1. Upgrade seems to go well, but z2m never seems to get ready:
[09:55:23] INFO: Preparing to start...
…
-
Using the docker image on Ubuntu running on an Intel NUC.
This is the output I see.
`root@66782e20ef37:/tmp/silabs# ./ncp.py scan
Connecting to.. /dev/ttyUSB1 57600 True False
{"ports": [{"po…
-
### Describe the issue you are experiencing
Today while trying to do an addon upgrade I discovered an issue I've seen (and fixed by restarting HA OS/the host) before:
https://github.com/home-ass…