-
以下是log:
===== custom modules begin =====
register demuxer : ijklivehook
===== custom modules end =====
av_version_info: ff3.1--ijk0.6.0--20160715--001
ijkmp_set_inject_opaque(0x100c37dd0)
ijkmp_set_i…
-
Tried flashing P3X_FW_V01.11.0020.bin with FW_DEBUG but failed (steady long beep and red camera gimbal status)
Anything i should follow?
[P3X_FW_RESULT_AB.txt](https://github.com/o-gs/dji-firmware…
JGabT updated
3 years ago
-
> INFO[2020-11-16T16:06:28.137335000Z] Starting k3s agent v1.19.3+k3s3 (0e4fbfef)
> INFO[2020-11-16T16:06:28.139898340Z] Module overlay was already loaded
> INFO[2020-11-16T16:06:28.1…
-
When I try to repair a very large file (8K Video!!), which misses a bof at the end, the tool fails with the following log output:
```
Overflow: 64-bit Chunk Offset value too large (8543760272).
…
-
Can anyone find a solution to unbricking this chip.
-
It would help in hacking if we had sharp pictures of all the boards making up Phantom 3 Pro/Adv (both Aircraft and RC).
@notsolowki already prepared photos of camera top board - these are not perfe…
-
Hi i come to use your tool to extract the modules for my inspire 1
when i do this command :
python dji_xv4_fwcon.py -vvv -x -p WM610_V01.11.01.50.bin
it starts to extracts all the modules then when…
-
## Environment
CMake version: 3.18.0
System: ubuntu16.04
arm-none-eabi-gcc version:
```
(base) machine% arm-none-eabi-gcc --version
arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 4.9.…
-
Compile error shown below.
I'm wondering if my environment is OK, or if I truly need to make source changes to ACL 19.05 in order to compile onnxruntime v1.3.1 with ACL 19.05. I get the same error…
-
Hi,
I'm trying to test ExecuteNetwork example on LeNet example in Caffe tutorial
http://nbviewer.jupyter.org/github/BVLC/caffe/blob/master/examples/01-learning-lenet.ipynb
After training proces…