-
I've noticed for some time now that Energy Today is higher in Home Assistant than reported on AP app or AP web site.
For example, HA for today reports 9.5kWh production where AP app only 7.9kWh. I'v…
-
In
https://github.com/ksheumaker/homeassistant-apsystems_ecur/blob/69b808cb2997c68a3c395c9fb580c6f16f9e27be/custom_components/apsystems_ecur/APSystemsSocket.py#L322
the temperature is calculated …
-
Any progress on changing the fact that
> this is not a regular HA add-on that can be installed by just searching for it inside the add-on store.
?
-
I am trying to integrate an APSystems EZ1-M at the template section and i have to set a different port (8050). Is it possible to add the port an the end of the host address? (host=x.x.x.x:8050)
**D…
-
Mit meinem Linux Mint Rechner VERSION="19.3 (Tricia)"und mit Python 3.6 war ich in der Lage mit dem Befehl
pip install apsystems-ez1
die entsperchenden Dateien runterzuladen und auch ein Python…
-
When the inverters are off, the following sensors report a value of 0:
- sensor.inverter_xxxxxxx_power_ch_1
- sensor.inverter_xxxxxxx_power_ch_2
- sensor.inverter_xxxxxxx_frequency
- sensor.invert…
-
I have a problem with updating data. I've try to install every version. The query doesn't work well. It's not updating automatically. Several times a day I have to switch the query button manually and…
-
with release 1.3.0b i lose the connection daily. same with the version 1.2.30. I need to power cycle my ECU daily and wait for it to get started again and again.
i have an ECU-R models (UID 2160xxxxx…
-
Hi, first of all thank you for all the hard work you already put into this and the other APS ECU projects! It really got me started with my own project because i could validate the communication with …
-
Won't work any longer i noticed today, can,t connect. Checked connection,but App/ECU all is fine and IP still correct.