-
If your using this for strictly output from LinuxCNC --> Arduino, with no input from Arduino --> LinuxCNC, then this doesn't work unless you turn on debugging on in the Arduino.
The reason is bec…
-
### Related area
BT
### Hardware specification
ESP32
### Is your feature request related to a problem?
No related issues
### Describe the solution you'd like
Our project uses the classic Blueto…
-
Dear Sir,
Please note that the library file called is not included in the getRpm example, as published here: https://github.com/Longan-Labs/Serial_CAN_Arduino/blob/master/examples/obd_demo/getRpm/…
-
**Is your feature request related to a problem? Please describe.**
_A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]_
Nagham asked about the role of .cpp…
-
I would like to work on the ATmega code in-place in the repo. This requires the /hardware folder tree to be in the repo somewhere. Let's discuss the best place to put this. I want to avoid having to c…
-
When I use this CH347T programmer and set the SPI frequency to 15 MHz (30 and 60 produce bad readings in my tests), it does not save that setting properly when I close and reopen AsProgrammer.
It s…
-
I was just wondering if there was any way to use an arduino uno for "hacking" the chroma 29. Just kind of soldering jumper wires to the board the connecting them to the arduinos analog pins or somethi…
-
it doesn't compile, I use the example code
`
C:\Users\user\Documents\Arduino\libraries\DS4\DS4.cpp: In member function 'void DS4::begin()':
C:\Users\user\Documents\Arduino\libraries\DS4\DS4.cpp:2…
-
### Describe the bug
Build [Basics/display/display.ino](https://github.com/m5stack/M5Core2/blob/master/examples/Basics/display/display.ino)
**M5Core2 build error**
```
In file included from c:…
-
### Port, board and/or hardware
ESP32, Arduino Nano ESP32
### MicroPython version
MicroPython v1.24.0 on 2024-10-25; Arduino Nano ESP32 with ESP32S3
### Reproduction
Software and Hardware needed:…