-
### The problem
After upgrading to 2024.5.x, upgrading the firmware on the node(s) cause them to stop working. Wireless fails to connect, and no watchdog output shows up when clicking on log. Downg…
-
### The problem
Since upgrading Home Assistant to 2024.8.0, I am seeing an error when installing yaml that works in previous versions.
YAML is provided below.
ld2450 is underlined in red in Hom…
-
Dear brother
I am writing to inform you that my VDU has stopped functioning properly, failing to read data from the Arduino sensor. Although I'm not sure when this issue began, it occasionally occu…
-
Just to mirror our previous discussion on ebid :
Your StableNode can handle 5V on his pins and not this one, but it's only available for nrf24. It could be a nice feature to nicely integrate 5V sen…
-
- [ X] I have read the [README.md](https://github.com/flyte/pi-mqtt-gpio/blob/develop/README.md) file and visited the [Documentation](https://mqtt-io.app/) to see if the information there helps.
**…
-
I am interested in adding device drivers for I2C-based devices, such as G-sensors (accelerometers), RTCs, and the BH1750 light sensor, within the NuttX operating system. I have noticed existing driver…
-
### The problem
I bought an uart 24ghz mmwave sensor and bh1750 light sensor. i tried to set them up in yaml. but when i added i2c to the conf the logs said:
WARNING Can't connect to ESPHome AP…
-
### The problem
After upgrading to beta 2024.4.0B0 the plant or plant monitor does not work anymore.
https://www.home-assistant.io/integrations/plant/
### What version of Home Assistant C…
-
While accessing two sensors in this case:
BH1750
MMA8451
This is seeing mostly in the RP2040. Have tested with the SAMD51 and the nRF52840 without seeing this issue.
### Error
```python
>>…
-
### The problem
No issues installing and updating ESP Home configurations to multiple ESP 32 C3 boards up to and including ESP Home 2023.12.7
Carried out ESP Home Upgrade to 2023.12.8 and then carri…