-
Hi, I tried every configuration and read all the issue but still doesn't work
Every time I need to push pairing button on the desk to seen the green light (connected) on the card on home assistant
A…
-
So I have a few of these:
[https://www.aliexpress.com/item/1005004076896945.html](https://www.aliexpress.com/item/1005004076896945.html)
(purchased them and not the Xiaomi ones since their temp rang…
-
### Answers checklist.
- [X] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there.
- [X] I have used…
-
### What happened?
I have a new AC180 and an ESP32 Bluetooth proxy and while the integration finds the device, it only shows one sensor and one diagnostic that never get updated.
![Screenshot 2024…
-
I installed the latest NimBLE 1.4.2 library and compiled it for the Arduino Nano ESP32 board with ESP32 core 2.0.13, which worked fine.
Then, I switched to the ESP32 3.0.1 board, restarted my PC, …
-
I have implemented the refresh characteristics with service UUID 0x1801 and characteristic UUID 0x2a05 which are meant for indicating the service changes in the server to the ios BLE clients. I have i…
-
* bleak version: 0.21.1
* Python version: 3.9.2
* Operating System: Armbian 23.08.0 Bullseye on Bananapim2zero
* BlueZ version (`bluetoothctl -v`) in case of Linux: 5.66
### Description
I am …
-
I have a Desk with the Linak controller and a Linak BLE2LIN002 Bluetooth adapter (ver 1.08). Similar to what @lars-1 reported in https://github.com/j5lien/esphome-idasen-desk-controller/issues/7#issue…
-
Hi, I'm having a weird problem, preventing me to use this at all. As far as I know, @sud33p has the same issue.
I wanted to set up an ESP32 with for my Idasen desk with this config:
```yml
esphom…
-
My PR #17099 is for a new binding to monitor and control Hunter Douglas Generation 3 shades via Bluetooth Low Energy. This binding has different behaviour depending on whether the shade has been inte…