-
I've verified my radio is working using the Anytone CPS. Configuring the same data in qdmr leads to me transmitting with the incorrect contact ID of 12345678, when it should be 9998.
I don't know …
-
Hey all, I've got the following condition I cant get past:
When I fire up qdmr, I can successfully detect my radio with the detect function, with the following messages in the console:
```
De…
-
878 FW 3.01:
Setting "channelNameColor" does not seem to have any effect - it stays white as before. To get Channel B and the Zones in white, I have to set the color to "Turquoise". Setting it to "W…
-
As the AT-D868UVE is supported, it should be easy to implement the differences only. Also already got a wireshark capture of the read/write operation. Hence emulation for codeplug verification is poss…
-
Hi! The BTECH DMR-6x2 is basically an Anytone D868UV with the addition of recording hardware (?) and some extra features. It supposedly supports D868UV code plugs. I am available for testing if needed…
-
Hi, I was testing with QDMR, and I am unable to connect. Seems that my device just is not supported yet. It is a BAOFENG DR-1801UV. I am happy to help with all the information needed to get this devic…
-
I was updating the codeplug on my rt3s to the latest VKDMR standard. I already had a contact, channel and zone definition for TG9990. The contact had this defined as a group call. I changed this to…
-
These are a huge amount of settings to be implemented:
- [x] Implement AnytoneSettingsExtension
- [x] Implement common settings (for all AnyTone and derived devices)
- [x] Implement setting…
-
What cool things would be _easy_ with the wifi feature but interesting enough to draw people in (and maybe earn some goodwill with FCS for future collaborations?)
* A simple web interface for codep…
-
I have enable SDS remote control on my MTM800E, but still can't activaten call controll on PEI.
I have try RPI gpio UART and USB TTL, they not work.
Is there any good way to solve it?
Thanks! Sorry…