-
What I noticed is the friction with resin prints. First I decreased the diameter of the stem and I glued a layer of teflon tape onto the stem. Then I applied some dielectric grease. It now works smoot…
-
Hello,
On VD, there is a noise pre-scan that is used as dependent measure for the recon. A noise de-correlation functor (pre-whitener). I'm assuming that you are using this.
What is being done on …
inati updated
10 years ago
-
### 🔍 Before submitting the issue
- [X] I have searched among the existing issues
- [X] I am using a Python virtual environment
### 🐞 Description of the bug
The solder mask dielectric is 0.
### 📝 …
-
```
I never coded the cot hypersingular term in the Maue-Kress spectral
quadrature for the T boundary integral operator on closed analytic curves.
This wasn't needed for dielectric interfaces since in…
-
```
I never coded the cot hypersingular term in the Maue-Kress spectral
quadrature for the T boundary integral operator on closed analytic curves.
This wasn't needed for dielectric interfaces since in…
-
I am very interested in pydefect and I make some tests following the implementation in test_kumagai as in pymatgen.analysis.defects:
https://github.com/materialsproject/pymatgen-analysis-defects/blo…
-
From email from @superchap123:
I think we should make a cover for the ISP connector and fill it with a protecting lubricant to mitigate corrosion. Something like this: https://www.amazon.com/NyoGe…
-
While plane-wave expansion method is efficient for modelling dielectric materials, it is inefficient at modelling materials such as metals or modelling finite (non-periodic) systems
It would theref…
-
Examples from @InaneCoding
- Capacitor 2012 C0G 10% 22nF
- Capacitor 2012 C0G 5% 220pF
- Resistor 3225 50R
-
As discussed on Slack there is an issue with dictionaries appearing in gradients. The following is as minimum an example as I could make.
This requires Molly master, Zygote master, ChainRules 1.44.…