-
Does Direwolf have the ability to digipeat a packet exactly as it's heard?
So not tracing, or marking digipeated packets, but repeating it as it's heard, as if it's from the originating station like …
-
I have a simple setup, where I connect a phone with aprsdroid apps directly to my handy radio via aux cable.
The GPS is well established and I can see my location as well as tracking on the aprsdroid …
-
I installed v1.3.1 based on the text I read about the previous version having some Windows keying problems.
My Igate/digi is up an running but not without some other software help.
For some backgrou…
-
Ralph N0AWN and Matt N0YNT have a new Bridgecomm 222 MHz repeater in stock to replace the old 224.940. Matt has verified June 2021 that a low-coverage, coordinated, 224.94 exists and is on the air in …
-
_**Steps to reproduce**_
Send a message from RF to RF using a direwolf digipeater configured as digipeater only
_**Expected result**_
Message is digipeated unchanged and reaches its recipient
…
-
I'm trying to get direct messages working in TNC2/text mode. I'm using 2 boards running loraprs, one as iGate, the other as client connected to APRSdroid. Messages from APRS-IS to RF work. The ACK is …
-
When running direwolf 1.7G, the following message started to appear continuously. It worked for about 7-10 days. This message was displayed on the terminal running direwolf.
```
JA3VQW-10 audio le…
-
Hi, in simple aprs with arduino why do you use 2400 hz tone ?
It's supposed to be 2200 hz no ?
-
Reciving station got this after LoRa Modul has digipeated packet.
![Bildschirmfoto von 2022-10-16 08-24-22](https://user-images.githubusercontent.com/28433353/196021474-65fb89ab-136d-4422-9045-8ac2d4…
-
Hello,
as far as I understand the KISS interface of this solution is not compatible with AXIP or AXUDP, am I right?
For AXIP, on both sides the partner has to be specified by his IP address. Com…