-
Hello,
i am using sonoff basic, latest version of sonoff tasmoa (from today) and have the following setup:
- 3 DS18B20 sensors connected to GPIO14
connections:
- 3.3V as power source (first pi…
-
Hi!
very interesting project.
One question that was not obvious from your readme:
Are there multiple devices allowed on one 1W bus, or must each have it's own pin?
Example: I have 5 DS1820 on on…
-
Whenever I use Onewire & Wifi together on the ESP32, the readings from my DS18B20 temperature sensor are erratic. As soon I disable the Wifi the temperature sensor reads normal.
Just wonder if anyone…
-
When I try to add a DS18b20 under the 1Wire entry in sensors I just get the blue status bar but no confirmation on the web interface.
When I am logging I get:
`2019-02-28 10:59:33,518 - WARNING -…
-
The library is located at https://github.com/SV-Zanshin/DSFamily
# DS-Family library [![Build Status](https://travis-ci.org/SV-Zanshin/DSFamily.svg?branch=master)](https://travis-ci.org/SV-Zans…
-
First of all I found no info on how to add a new sensor into config.py.
I read ".. so you need to specify which ones are connected in your config.py file (see below)." and then I found no example of …
-
There are two problems with the current handling for DS18b20:
1- there seem to be a limit on how many sensor we can sample with the current version of the code. Fro instance, we built two lines of 21…
-
Hi,
Thank you for the library, I haven't found any other that works like this one.
I am trying to control a couple (3-10) of attiny85s (slaves) with an arduino (master). So far I am able to read a…
-
Simonf [5:17 PM]
@jdavid @John Hulth, Sven recovered two stations, and copied in this zip file the content of two stations. He brought both indoor to access the SDs. For both stations, the program st…
-
@J-N-K I have BMS-THS-211 from Elab.
If I discover them it get BMS sensors at inbox. I didn't add them.
If I configure them manually I get `UNINITIALIZED - HANDLER_CONFIGURATION_PENDING`
If I confi…