-
### The problem
Impossible to launch the build using the ADC component on an ESP32-C6. The exact same pin using a digital read is compiled, but using the ADC module I get the error as displayed in th…
-
Hi. I am working with the ESP32-C6 SOC. Initially I had a DevKitM-1. When commissioning via Matter / Thread, I use the same manual pairing code 34970112332 or QR code MT:Y.K9042C00KA0648G00 , which se…
-
If I'm not mistaken, the ESP32-C6 (and the ESP32-C3) can enable a Serial Monitor by sending a command to the bootloader. Afterwards, serial output (e.g. `Serial.println("Hello!")`) could then be recei…
-
The output from the ESP32-C6 to a 8x8 WS2812B array is wrong. The bit time is 0.625 microsecond, but it should be 1.25 microsecond. Consquently random colored pixels are displayed. I was trying to mov…
-
### Question
I have gotten the sleepy end device code to work on my ESP32H2 - however, I cannot use a led driver (connected via i2c) after the board wakes from sleep. Is there a lock that I need to …
-
I installed the master version of the esp-idf SDK using the online installation package
The computer is connected to a network cable
The error log is in attached.
[idf-tool-log.txt](https:/…
-
### Description
Description
Hello All,
I am trying debug esp32c6 using open ocd, I followed tutorial in link:
[[https://nuttx.incubator.apache.org/docs/latest/platforms/risc-v/esp32c6/index.h…
-
Hi everyone. I have a problem compiling the ESP-AT project. I am following the steps from here https://docs.espressif.com/projects/esp-at/en/latest/esp32/Compile_and_Develop/How_to_clone_project_and_c…
-
### Is your feature request related to a problem?
After many days of trying to get TWT functional, one of the main selling points of ESP32-C6, I can't get the current implementation (ESP-IDF 5.1.3/…
-
Hello all,
I am trying use Nuttx in ESP32C6-devkitm.
I followed the tutorial: https://nuttx.apache.org/docs/latest/platforms/risc-v/esp32c6/index.html
Below you can se my outputs:
`~/nuttxspace…