-
### Board
ESP32-S3-DevKitC-1-N-32R8V
### Device Description
ESP32-S3-DevKitC with only USB serial cable attached.
### Hardware Configuration
n/a other than onboard RGB used in sketch.
…
-
Hello developer, I use esp32s3 n16r8 development board flash size 16M after brushing into the firmware or can not identify the wireless route, the source code needs to modify where to adapt?
-
I would also like to know if it would be compatible with ESP32S3. Thanks
-
Hello,
i had compilation problem with BME680 and ESP32S3.
Here is the solution for me:
Library:
1. install DFROBOT BME680 (2.0.0)
2. install`` BSEC (1.8.1492)
Download this: https://commun…
-
Tried a few days to let it display something but only showing blank screen
2. PlatformIO IDE
3. Latest TFT_espi library
4. Not very sure about board package version, it is probably the latest as …
-
**Describe the bug**
We are trying to get Modbus RTU RS485 commutation working on the ESP32S3. We have custom hardware + software with Zephyr 3.6 working correctly. However, when migrating to Z…
-
I try flashing the Freenove_ESP32_S3_WROOM_Board using Arduino IDE 2.3.3 . The Board Manager seems the current version (https://github.com/espressif/arduino-esp32, https://dl.espressif.com/dl/package_…
-
### Board
ESP32-S3-Matrix X1
### Device Description
Waveshared ESP32-S3-Matrix X1
### Hardware Configuration
no other devices
### Version
v2.0.16
### IDE Name
PlatformIO
### Operating System…
-
I have added a new board to this software. It is not stable so I did not do a pull request yet.
The board is functional (wifi works, I can log in and see the status). However when I open a new stream…
-
### Operating System
Linux
### Arduino IDE version
Arduino IDE 2.3.2
### Board
ESP32S3 Dev Module
### ArduinoCore version
2.0.13
### TinyUSB Library version
Latest 3.1.4
### Sketch as ATTACH…
jhsa updated
2 months ago