-
hi, i have connected the smart filament sensor to the TFT35 E3 V3.0 at the fil-det connector on TFT, this is the part in config.ini
`fil_runout:2
fil_runout_inverting:1
fil_noise_threshold:100
fil…
-
The filament detection sensor keeps triggering for a filament change I've tried inverting the sensor, raised the run out distance but it still happens. I'm using an Skr 1.4 Turbo board and it's plugge…
-
**Test scenario:**
- ERCF v2
- Selector touch configured and enabled
- Selector physical endstop configured and enabled (NOT using virtual selector endstop)
- Filament blocking gate from moving
…
-
During a print when the gate is blocked by filament, Happy Hare detects the problem and attempts to recover, however the servo does not move into the down position before trying to retract filament. S…
-
Hello, I'm trying to tune my EREC filament Cutter but it's going though.
I have
```
variable_user_pre_unload_extension : 'BLOBIFIER_PARK' ; Executed after default logic
variable_user_post_unlo…
-
### Printer model
MK4, XL
### Describe the feature
Basically, users could chose to replace the preheat button with, for example, "set ready". Alternatively, users could add two new buttons to…
-
Trying to set up the SFS V2.0 on an SKR Mini E3 V3 and not sure of the wiring. The manual has the wiring from the SFS going to 2 pins on the E0DET and to 2 pins on the E1DET plugs and the SKR Mini E3 …
-
I'm having same issue as https://github.com/MoonshineSG/Octoprint-Filament/issues/20
logs show:
2017-05-11 22:39:27,680 - octoprint.plugins.filament - DEBUG - Detected sensor [26] state [1]? !
20…
-
So I know you have done great work incorporating the filament width sensor into the Marlin code so that we can more accurately control extrusion speed relative to volume of filament etc. And it seems …
-
### Is your feature request related to a problem? Please describe
There are still printers without a filament sensor (e.g. Sovol SV06)
### Describe the solution you'd like
For printers without a fi…