-
Hello,
I have OpenWRT booting up on the neo2, but I am not having any luck figuring out how to get the NanoHat OLED to work or be discovered by the kernel. I suspect I may be missing a driver or s…
-
IPv6 connections are unreliable when tx offloading is enabled. The symptoms are like there is an MTU issue between the two endpoints (for example, spamming `dmesg` stalls halfway through output), but…
-
Hello Mitch,
I did:
git pull
rm -rf build/linux-5.2.21/
make
It fails leaving produced iso without PD and Orca.
This is the part I suspect:
> mkdir -p /home/reverbrick/Documents/Stuff/H…
-
*andygaof:*
Supply the following if possible:
- Device problem occurs on
image builder
- Software versions of OpenWrt/LEDE release, packages, etc.
openwrt-imagebuilder-rockchip-armv8.Lin…
-
### 详细叙述
make menuconfig找不到r6s了,之前有
### 重复 issue
- [X] 没有类似的 issue
### 具体型号
friendlyarm_nanopi-r6s
### 详细日志
无
-
I burn debian-bullseye-core-arm64 to SD card in order to install some packages. After that, I would like to clone the SD card to image file(s) in order to get a smaller size image file and it can be …
-
2020-01-02T09:35:01.8397510Z * [new tag] v2016.09-rc1 -> v2016.09-rc1
2020-01-02T09:35:01.8400056Z * [new tag] v2016.09-rc2 -> v2016.09-rc2
2020-01-02T09:35:01.84…
-
manifest里的部分被改动了,下面是相对18061增加的部分,是什么用意呢?
remote name="v18061"
fetch="."
revision="refs/heads/master-v18.06.1" />
remote name="self" fetch="https://github.com/skytotwo" />…
-
各位老师好,我在为新买的R2S Plus套装折腾OpenWRT固件,目前的构想是在[R2S的固件](https://openwrt.org/toh/friendlyarm/nanopi_r2s)上引入rtl8822cs SDIO WiFi的支持,我想这样应该就可以工作?但是rtl8822cs的驱动应该如何引入呢?和[`scripts/wifi/add_rtl8852be.sh`](https://…
-
### Creating a bug report/issue
#### Required Information
- DietPi version | `cat /boot/dietpi/.version`
G_DIETPI_VERSION_CORE=8
G_DIETPI_VERSION_SUB=12
G_DIETPI_VERSION_RC=1
G_GITBRANCH='mast…