-
#### context
```
PDP-11 simulator Open SIMH V4.1-0 Current git commit id: 4e159a04
sim> d 10000 072002
sim> e -m 10000
10000: ASH R2,R0
sim> d 10000 072102
sim> e -m 10000
10000: 072102…
-
- #### Context
In `I7000/i7090_cpu.c` the memory size is initialized to 16Ki.
If you start `BIN/i704` and type `show cpu` it will report
```
CPU
704, 32K
```
but if you enter
```
…
-
- #### Context
It has been a while since I looked at the results from the self-tests / diagnostics (it seems that the makefile just continues even after a failure, which makes failing tests somewhat …
-
- #### Context
The HP2100 simulator is missing the file hp2100_di_dc.* along with the support for CS/80 HP-IB drives. This support should be there according to…
-
Fehler beim Sichern der Partition /dev/sda1
The command used internally was:
sfdisk --show-geometry /dev/sda
The output of the command was:
Displaying error box: Fehler beim Sichern der Partit…
-
the label Stack 1 Stack 2 and Stack three should be relabled Stack 1 & 2, Stack 3 & 4, Stack 5 & 6
-
Is there an way to change the analog clock in the bottom bar to digital?
-
It seems that I have a situation where CMock is following the `#include`s of a mocked header, and ends up with a compiler error.
I have a test file (**test_ADC.c**) that begins with:
```
#include…
-
When executing `SET THROTTLE x/y`, pressing ^E character on the console **does not** stop the simulator:
- #### the output of "sim> SHOW VERSION" while running the simulator which is ha…
-
So this probably sounds crazy but I'm looking to try out using all of NsCDE but with a 95ish panel instead of the presentation manager+dock way.
How can I add to my config file to not load the dock…
ghost updated
10 months ago