-
I have just bought Big Dipper board and I'm going to run it with Raspberry Pi i n SBC mode.
First of all, I replaced firmware for Duet5Mini+ suitable one, downloaded from Duet3d website. In no-SBC…
-
Hello, I recently received one of these boards but I'm having trouble using the SD card on it. It does not seem to be detecting an SD card present in the slot. Has anyone else dealt with this error?
-
I am having an issue with the firmware on your github. I cannot pass the y axis test on the startup wizard. I used the hex file from the firmware file on the Fysetc prusa mini clone plus github, downl…
-
Hey all,
I spent WAY too long discovering that using a BTT TMC2209 with a BTT SKR V1.4 just won't work in full read/write mode. The 3.3V pull-up of the gpio against the 20K pull down on the driver…
-
There are files missing in the Black part... I will not order anything printer to test before you have ALL the files right and here
-
My board updates fine from the sdcard via the firmware.bin/old.bin method.
If I use Klipper's built-in flash-sdcard.sh script, though:
`./scripts/flash-sdcard.sh /dev/serial/by-id/usb-Klipper_stm3…
-
Other than the "hook" on the top of `Clockwork2.STL`, I can't find any differences in the shape of the objects in this repository and the office Voron STLs.
Am I missing something, or is it just a …
-
I'm working on my DIY project of extending ender-3 printer with WiFi capability. I like your product. It can be used as remedy of fast gcode transfer from octoprint to printer's sd card. But I still m…
-
When I copy the firmware to the rp2040 it will not be recognized when I unplug and move to my PC running klipper. In order to make it work, I have to connect to the PC running klipper and then copy th…
-
Hello,
ive been following
>
```
Enter DFU mode first
First power off the board
Set jumper on 5v pin and DC5V
Place jumper on BT0 to 3.3V pin
Connect USB cable to the bo…