-
Hey,
First of all thank you for this wonderful code, it is the best documented I have found for the T-Beam and is very cleanly written.
This may be more an issue of my understanding rather of TTN …
-
Thanks for your great design!
I'm currently picking all the parts to build my own full size V3. I have a few questions about some of the components:
L7 has a value of 8.2uH in a 0402 package. Is…
-
Hi
SNR Value is wrong when published for gwmp-mux to gateway-rs or any other semtech packet fwd listner
received packet with snr: 6.8, but after gwmp-mux snr changes to snr: 0.0000002, this wil…
-
On Ubuntu 14.04 LTS, samples/proxy_sample application will crash if manually kill( kill -9 pid ) the launched process(proxy_sample_remote). This happens only if we had used launch options(**activatio…
-
When the coordinates are set to lat=0, lon=0, the status packet that are sent looks like:
```
{"stat":{"time":"2017-05-15 14:29:06 GMT","lati":0.00000,"long":0.00000,"alti":10,"rxnb":0,"rxok":0,"rxf…
-
![GW_vs_Tx](https://user-images.githubusercontent.com/36918728/122074932-f1ab0580-cdf9-11eb-9e8f-96c9ff4b068b.png)
When a device reached too many gateways (10), then there is too many hyperbolas in…
-
Today I have installed a GPS receiver on my DMR repeater. The GPSD daemon is operational and the data appears to be correct and GPSD is activated in MMDVM.ini. The problem is that the repeater is conn…
-
I have Arduino Nano, RFM95W 868Mhz and installed LowCostloRaGwGW and working ping-pong sketch :-). I was try with DHT22 and it works to. How to connect GPS module gy-gps6mv2 and send coordinates to …
-
**Describe the bug**
The Lora32 shows the boot screen but gets stuck in a boot loop.
**To Reproduce**
Steps to reproduce the behavior:
1. Check out commit `8c2c217acca4f951fc3583eed54a9c47e35e3e…
wyan updated
10 months ago
-
Laut Mail von andrelf:
> 1. stehen in obiger website noch folgende falsche Links drin:
> http://graph.md.freifunk.net/graph.html und
> http://graph.md.freifunk.net/geomap.html
Kann ich bestäti…