-
Operating system: e.g. Raspbian Bullseye
Python version: e.g. 3.9.2
Pi model: Pi 3 Model B+
GPIO Zero version: e.g. 1.6.2
Pin factory used: e.g. RPiGPIO
Used Shields:
Joy-IT StromPiV3 (using …
-
**Describe the bug**
Im not able to connect my Pi Zero W 2 to the WiFi. The Pi does not create an Access Point, adding a wpa_supplicant.conf did not work (manually or with the Pi Imgager Tool). I was…
-
Instead of using alsa for the audio subsystem, as I see the note about latency and audio quality, upgrade to use PulseAudio for more options around loopback configurations and audio settings when usin…
-
I thought about the Raspberry Pi Audio output quality.
For my speaker i am going to derive a bit from your configuration.
There are two different possible ways for me to realize a better Sound outpu…
-
I'm trying to get audio from JACK rather than a native ALSA device. Will describe my tests in this issue thread in the hope that they might be useful.
Platform is an RPi 4 with a Hifiberry DAC+ADC …
-
Hi
Got my hands on a used Beosound 5, which I think is one of the most beautiful of the Beosounds! I figured out how to connect to the dial via USB and was actually [planning to do a custom UI](htt…
-
Issue:
When pausing and/or skipping there is a piece of audio repeated straight after the action. This is very audible and sounds like a glitch. The piece of audio lasts like 0.5-1.0 sec.
Replicat…
-
The ES9018 is on another level for DACs and there's plenty of documentation for the chip itself, but the problem is when certain 3rd parties release a board that is almost certainly an attempt at a kn…
-
Hi,
I hope it is correct that I am posting my question here as I am pretty sure it is actually not an issue with RPi-Jukebox-RFID but rather my own inability to make this work. Please let me know i…
-
Hello
I am using a rpi with a TRANSPORTPI DIGI Ultra Low Jitter Digital Audio Interface Module on top and a purepi with an ifi ipower adapter. The transportpi sends its signal via toslink in to a be…